Welcome to our Marketplace!
Please contact us to purchase any of our products or to get more information and details!
Phone: (317) 858-7793
Email: sales@ipcindy.com
*Temporarily Unavailable*
Part Number: DP420
3M Epoxy Adhesive
-High peel and shear strength
-Maintains lasting bond at high and low temperatures
-20 minute work life
-Adhesive cures at room temperature
-Reaches high strength quickly with heat cure
-Recommended Applications
= Small joint assembly
= Heavy-duty mounting assembly
= Metalworking
= Carbon fiber epoxy bonding
206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed.
-Provides adequate working time at higher shop temperatures
-Mix with WEST SYSTEM 105 Resin in a 5-part Resin to 1-part hardener ratio
-Once cured, it forms a rigid, high-strength, moisture-resistant solid
-206 Slow Hardener is not intended for clear coating
-Pot Life at 72F (22C): 22 to 25 minutes
-Cure to a solid state: 10 to 15 hours
-Cure to maximum strength: 1 to 4 days
-Minimum recommended temperature: 60F (16C)
-.86 gallon
-Please see attached data sheet for additional information/instruction
Altek H800 Series Polyester Resin
-Designed for use in the manufacturing of composite parts using hand lay-up application methods
-Fast cure rate allows for faster production rates without loss of surface profil
-Reduced post cure
-Fast and complete fiber wet-out
-Adaptable to a variety of manufacturing processes and conditions
-Polyester ; $60/gal
-Please see attached data sheet for additional information/instruction
205 Fast Hardener is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures.
-Produces a rapid epoxy cure that develops physical properties quickly at room temperature
-Mix with WEST SYSTEM 105 Resin in a 5-part resin to 1-part hardener ratio
-Resulting cured epoxy is a rigid, high-strength, moisture resistant solid
-Pot Life at 72F (22C): 9 to 12 minutes
-Cures to a solid state: 6 to 8 hours
-Cures to maximum strength: 1 to 4 days
-Minimum recommended temperature: 40F (4C)
-.86 gallon
-Please see attached data sheet for additional information/instruction
Pricing: 105-B; .86 gal – $51.35, and .98 gal – $106.5
105 Epoxy Resin is the base material on which all WEST SYSTEM 105 System epoxy compounds are built.
-Clear, pale yellow, low-viscosity liquid epoxy resin
-Blended with hardener at the proper ratio, it cures to a hard, solid plastic with superior physical properties
-Based on which hardener you choose, it cures at a wide range of temperatures.
-Once cured, it forms a high-strength solid that is functionally waterproof, an highly resistant to moisture vapor.
-Safety Data Sheet: WS-SDS-Epoxy-Resin-105-B